PARTS

Need a replacement part? Questions about installation?
Contact our Flame Specialists ►

FK1

For use with any burner 249K BTUs and below.
Kit Includes:

(1) 36” L x 3/4” Diameter Flex Line
(2) 3/4″ Flared Fittings
3/4” Key Valve
3” and 12” Key
1/2” x 2” Nipple

FK2

For use with any burner 250K BTUs and above.
Kit Includes:

(2) 36” L x 3/4” Diameter Flex Lines
(4) 3/4″ Flared Fittings
3/4” Key Valve + 3” and 12” Key
(2) 3/4” x 3” Nipple
(2) 3/4” Tee
(1) 3/4” x 1/2” MM Reducer Fitting

FKM1

Mercury Ignition Single Flex Line Kit – for use with any burner 249K BTUs and below.
Kit Includes:

(1) 36″ L x 3/4″ Diameter Flex Line
(1) 1/2″ x 2″ Nipple

FK2

For use with any burner 250K BTUs and above.
Kit Includes:

(2) 36” L x 3/4” Diameter Flex Lines
(4) 3/4″ Flared Fittings
3/4” Key Valve + 3” and 12” Key
(2) 3/4” x 3” Nipple
(2) 3/4” Tee
(1) 3/4” x 1/2” MM Reducer Fitting

FKM2

Mercury Ignition Dual Flex Line Kit – for use with any burner 250K BTUs and below.
Kit Includes:

(2) 36″ L x 3/4″ Diameter Flex Line
(2) 3/4″ x 3″ Nipple
(2) 3/4″ Tees
(1) 3/4″ Male x 1/2″ Male Reducing Fitting
(1) 3/4″ Male x 1/2″ Female Hex Reducing Bushing

FIT180

Flex Line & Key Valve Connection Fitting for use with any burner under 249K BTUs. Connects 1/2” Plate Coupling to inside threaded 3/4” Flex Line Flare Connector.
Kit Includes:

(1) 1/2” x 2” Nipple

FIT250

Flex Line & Key Valve Connection Fittings for 250K – 299K BTU Burner. Connects 1/2” Plate Coupling to two 3/4” Flex Lines + connection of two 3/4” Flex Lines to 3/4” Key Valve.

Kit includes:

(1) 3/4” x 1/2” MM Reducer Fitting
(1) 3/4” x 3” Nipple
(2) 3/4” Tee

FIT300

Flex Line & Key Valve Connection Fittings for 250K – 299K BTU Burner. Connects 1/2” Plate Coupling to two 3/4” Flex Lines + connection of two 3/4” Flex Lines to 3/4” Key Valve.
Kit Includes:

(1) 3/4” x 1/2” MM Reducer Fitting
(1) 3/4” x 3” Nipple
(2) 3/4” Tee

FL3612

36″ L x 1/2″ Diameter Flex Line (MM).

FL3634

36″ L x 3/4″ Diameter Flex Line (MM).

KV12

1/2″ Key Valve + 3″ Key.

KV34

3/4″ Key Valve + 3″ Key.

KEY

Available in 3″, 12″ and 24″.

DRIPLEG12

1/2″ Drip Leg Kit.

DRIPLEG34

3/4″ Drip Leg Kit.

LPRH

Liquid Propane Regulator mounted on 5/16″ 10’ Hose with handwheel quick connect. For use up to 200K BTUs with a 20LB Propane Tank.

REGLP200

Regulator 3/8 in. NPT Female Outlet 200K BTU/hr capacity. Maximum inlet pressure 250 psi. Low pressure outlet 11 in. W.C. Liquid Propane.

FPVK

Fire Pit Vent Kit: (2) 12″ x 4″ Vents
+ 18 square inches of vent area per vent.

COLLAR

Paver Kit Adjustable Install Collar 19”.

COLLARF

19″ Flexible, No Drill Collar for installation between courses of block.

KVE4

4″ Threaded metal Key Valve Extension.

KVE8

8″ Threaded metal Key Valve Extension.

VENTBW

(2) 11 3/8″ x 4″ Vents for Belgard Specialized Gas Insert Kit. Each Vent replaces one block of support and 18″ of venting.

MBRBW

11 3/8″ x 4″ Aluminum Key Valve mounting plate + (2) 3/4″ street elbows for Belgard Specialized Gas Insert Kit. Provides block support and punch-out for optional ignition.

VENTVL

(2) 9 3/4″ x 3″ Vents for Valencia Specialized Gas Insert Kit. Each Vent replaces one block, provides block support, and 18″ of venting.

MBRVL

9 3/4″ x 3″ Aluminum Key Valve mounting plate for the Valencia Specialized Paver Kit + (2) 3/4″ street elbows. Provides block support and punch-out for optional ignition.

REDUCER3412

Reducer 3/4″ Male x 1/2″ Male Fitting.

Need a replacement part or fitting? Have a question?
Contact our Flame Specialists at 303 346 2224